Brother HL-L2340DW Wireless Setup and Driver Installation – Brother Printer Support

Brother HL-L2340DW Printer

A company with more than 110 years of rich legacy the printers of brothers are compact, classy and chic. Brother’s HL-L2340DW model printer comes with many exciting features. The printer is best for home and office use. Printing with HL-L2340DW will be a certainly pleasant experience.

Main Features of the HL-L2340DW Model Printer

  • Swift, super-quality printing at up to 27ppm
  • Can be set up effortlessly and could be shared on your wireless network or connect locally through USB interface
  • Conserves paper through two-sided automatic printing
  • A 250-sheet capacity tray
  • A 2600 page High yield replacement toner cartridge
  • Attractive colors

Brother HL-L2340DW Setup

Brother hl-l2340dw setup can be done in two ways, through a USB cable connection or a WiFi connection. Follow the below instructions for a successful set up either ways.

Brother HL-L2340DW Setup

Brother HL-L2340DW Setup

Brother hl-l2340dw setup Using a USB Cable

  • Un-wrap your Brother HL L2340DW printer and check the printer’s components
  • The components of the machine would be the pre-installed Drum unit, AC power cable, Quick Set up guide, Inbox/Starter Toner Cartridge, CD ROM and Product Safety Guide
  • First read through the product safety guide and then the quick set up guide for the correct installation procedure
  • Take away the packing materials and open the front panel of the printer
  • Pull out the drum unit and take out the silica gel pack from the drum unit
  • Take away the orange tape around the sides of the printer’s drum unit.
  • You will find a long orange tape under the printer, which must be removed now. Then shut the front panel
  • The toner cartridges will be already mounted in the drum unit of the printer
  • Open the paper tray that is under the drum unit
  • Deposit the white sheets in the paper tray and adjust the width guides. Do not adjust the width guides too firmly as this may damage your paper and may cause paper jam issues
  • Now, connect the power cable of your printer to an electrical outlet
  • Subsequently, connect the power cable to your printer and to an electrical outlet and Switch on the printer
  • Then attach the USB cable to the computer immediately when the printer is ready with the first time installation
  • Likewise, your computer must be connected to an active network connection.
  • When your Computer is connected to the Brother L2340DW Driver to printer, the built-in drivers for your printer will automatically get downloaded
  • When connecting the USB cable, ensure to place the computer and printer at a minimum distance
  • Now, turn off the printer and turn it on again. Now, the printer is ready to print

Brother hl-l2340dw Setup to Your Windows Computer to a Wireless Network Connection

The first seven set up steps are exactly same as the steps used to connect the L2340DW printer to the Windows computer using a USB cable. The following are the steps that are specific for connecting the Brother Hl-L2340DW to WiFi network connection

  • Connect the power cable to your printer and to an electrical outlet
  • Switch your L2340DW printer on
  • First, make sure that your Wi-Fi is set up
  • Identify you SSID or your Wi-Fi connection name from your Wireless network key
  • If not clear get the SSID and Wi-Fi connection details from your internet provider or network administrator
  • Bring the Wi-Fi router and your HL-L2340DW printer as near as possible
  • Check if the printer is awake
  • Press ‘Ok’, now select the network and again press ‘Ok’
  • Likewise, Press ‘Ok’ after selecting WLAN and then select set up wizard and press ‘Ok’
  • Thereupon, Press the upward arrow key and it will result in searching your SSID, select your network and press ‘Ok’
  • Type your password and enter Ok and then press upward arrow
  • When asked for Apply Settings? prompt click Ok using upward arrow
  • You will see a message, “Connecting WLAN” and a moment later the message, “Connected”
  • Consequently, the WLAN report will be printed
  • The Wi-Fi indicator on the home screen glows indicating your successful set up

Through the above instructions, you should be able to connect your Brother HL L2340DW printer successfully by USB or wireless and then print effortlessly. If not please call us upon our toll-free number +1-844-485-5080 or visit Brother Printer customer service.

Start typing and press Enter to search

Shopping Cart